| Customization: | Available |
|---|---|
| Material: | Stainless Steel +PVC |
| Type: | Folding |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Control systems
Japanese Mitsubishi Inverter, PLC and other components.
Dynamical systems
Adopt special high-speed motor reducer,0.75-2.2KW, according to the size of the door to select the model.two brand for choice,SNMA or SEW.Incorporating limit switches for open and close cycles, and this drive unit can be used on manual in the event of power failure.
Door construction
Framework-------In 2mm thicknesses cold-roll steel sheets of Shanghai Baosteel, Or on
request,In stainless steel ,paint according to your order
Rolling shaft---------In 2mm thicknesses cold-roll steel tube with machined blocks at each and incorporating high-speed bearing
Cross bar-------In aluminum lath
Curtain------made in high-density polyester fabric.
Thinkness:0.8mm or 1.5mm
Self-extinguishing rate: DIN4102
Colour: as you require
transparent window------ -use transparent pvc film imported from Japan, various styles ,size and location according to your order.thinkness:1.5mm
safe systems
Photoelectric sensor-------installed on the side tracks, with emergency stopping reaction when sensing obstacles
Safe edge bottom-------when the people or vehicle touch the bottom edge of falling door,it bound up automatically
Emergency stop protection------with emergency stop buttom on control panel
Seal
seal brush are Installed inside the guides, besides,there is trap heavier fabric on the bottom, close to any uneven ground
Technical parameter
Power supply: single phase:220V /three phase:380 50Hz
Power consumption: max 250W
Opening & closing speed: 0.7-1.7m/s (optionally different opening speed upon request)
Opening & closing frequency:1000-1500cycles/day
Wind load:20m/s
Ambient temperature:-20°C to +50°C
1 Reply your enquiry in 24 working hours.
2 Experienced staffs answer all your questions in professional and fluent
English.
3 Customized design is available. OEM&ODM are welcome.
4 Exclusive and unique solution can be provided to our customer by your our
well- trained and professional engineers and staffs.
5 Special discount and protection of sales area provided to your distributor.
6.Do the best Garage Door, Roller shutter door, industrial door,windproof
door in china.
| Frame | 1.Power Coated Steel 2.Aluminum Track 3.Stainelss Steel Frame: S.S 304 |
| Door Curtain | France high-density polyester fiber , 0.8MM~1.5MM Thickness , red , yellow ,blue , green , orange , gray ,white , transparent ,etc .1.2MM thickness transparent PVC window , size and location is up to your request . |
| Motor Choice | 1.German SEW 2.China SEJ / SNMA |
| Power performance | 0.75- 1.5KW, power supply 220V/380V, brake voltage is 220V. |
| Control Panel | JapanMitsubishi Danmark Danfoss |
| Control voltage | Safe low-voltage 24VDC |
| Run Speed | Up: 0.5-1.0m / s / ; Down 0.5-0.8m / s (frequency conversion can adjust the speed). |
| Tensile strength | 5700/5100N/5cm, tear strength 900/80N. |
| Wind resistant | Wind resistant press steel wind resistant pipe ; 20m/s50Pa . |
| Command System | Radar Sensor, Magnetic loop , Remote Control, Push button, Rope Switch , ect ... |
| Safety Device | 1. Photocell Sensor(Korea Autonics) 2. Safety edge bottom (BUTTERFLY Pressure Wave Sensor) |
| Delivery Time | 10-15 business days |
| Package | Plywood case or Cardboard , suitable for sea freight or air freight . |
){kind=link}