pvc Fast Framed and Frameless folding Door industril gate Auto Door (HF-J323)
High Speed Rolling Stacking Door
HIGH SPEED ROLLING STACKING DOOR
Door leaf: 1.0mm high density polyester fiber imported from France. Yellow, blue, orange, white, gray and half-transparent yellow can be selected. Cooperated by wind resist steel pipes (strengthen pipes, with wind resistance wheels). Wind load capacity reaches to 9-11 Beaufort. (Due to the door's width).The transparent window can be optional. It is 1.5 mm thick, transparent PVC soft sheets.
Track and roller cover: 2.0-2.5mm thick high quality cool-molding steel, with high quality automotive spray paint (or electrical powder coating). The motor cover is 4.0mm thick. Standard color is ivory-white (a little milky yellow).
Track: Big track with liner of wind resistance structure.
Mode of opening: The roller rolls up the strap which pulls up the sectional leaf strengthened by the steel tube. The leaf staking upon top is like the single wing of a butterfly.
Sealing: Good sealing and decrease the noise by the sealing brush in the trackA reinforced airtight fabric at the bottom of the door provides the best possible match to any uneven floor surface.
Safety Device1: Photocell safety. When the door is falling down, if any object blocks the ray, it will rebound to the top to prevent goods or persons. When closing, if a person or an object is passing or touching it, the bottom safety will order the control box, to change the motor's direction and open the door back to top, to make sure the person or object uninjured.
Safety Device 2(as option)Safety bottom edge. The door will open to top if blocked when closing, to prevent goods or men. When the door is closing, if a person or an object is passing or touching it, the bottom safety will order the control box, to change the motor's direction and open the door back to top, to make sure the person or object uninjured.
Power unit:" German SEW (or SEJ)" motor.380V,3 phase,50HZ,IP55.0.75KW. (1.1-2.5KW for big doors).
With over hot proof and overloading proof.
Control unit: The control box is managed by PLC. The component is from France Schneider. The control box has open, close and stop function. Low voltage push button, safety and good quality.
Speed: The open and close speed is 0.8m/s.
Emergency operate device for power failure: Manual swing bar which can open or close the door
Automatic open type: pull roperemote, loop detector, radar as optional control mode.
Frame |
1.Power Coated Steel
2.Aluminum Track
3.Stainelss Steel Frame: S.S 304 |
| Door Curtain |
France high-density polyester fiber , 0.8MM~1.5MM Thickness , red , yellow ,blue , green , orange , gray ,white , transparent ,etc .1.2MM thickness transparent PVC window , size and location is up to your request . |
| Motor Choice |
1.German SEW
2.China SEJ / SNMA |
| Power performance |
0.75- 1.5KW, power supply 220V/380V, brake voltage is 220V. |
| Control Panel |
JapanMitsubishi Danmark Danfoss |
| Control voltage |
Safe low-voltage 24VDC |
| Run Speed |
Up: 0.5-1.0m / s / ; Down 0.5-0.8m / s (frequency conversion can adjust the speed). |
| Tensile strength |
5700/5100N/5cm, tear strength 900/80N. |
| Wind resistant |
Wind resistant press steel wind resistant pipe ; 20m/s50Pa . |
| Command System |
Radar Sensor, Magnetic loop , Remote Control, Push button, Rope Switch , ect ... |
| Safety Device |
1. Photocell Sensor(Korea Autonics)
2. Safety edge bottom (BUTTERFLY Pressure Wave Sensor) |
| Delivery Time |
10-15 business days |
| Package |
Plywood case or Cardboard , suitable for sea freight or air freight . |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}